Basic Info.
Model NO.
Carbide rod with two straight coolant hole
Logo Printing
with Logo Printing
Size
Per Your Requirement
Material
Tungsten Carbide
Certification
ISO 9001:2008
Grade
K10, K20, K30, Yg6, Yg8, Yl10.2
Diameter
Standard 1.2~32or Customized
Tolerance
H6 Ground / Blank
Usage
for Making Endmills and Drills
Transport Package
Carton Packing
Product Description
Grade Introduction Grade | ISO | Grain size (μm) | Cobalt Content (%) | Hardness (HRA) | Density (g/cm3) | T.R.S (N/mm2) |
GH10F | K05-K10 | 0.4 | 6 | 93.5 | 14.8 | 3800 |
Ultrafine grain size, with amazing wear resistance. High wear resistance endmill and engraving tools are recommended suitable for cutting PCB and composite material. |
GH15F | K10-K20 | 0.4 | 8.5 | 93 | 14.52 | 3800 |
Ultrafine grain size,with good wear resistance. High wear resistance endmill and engraving tools are recommended suitable for cutting PCB and plastic. |
GH25F | K20-K40 | 0.4 | 12 | 92.5 | 14.10 | 4200 |
Ultrafine grain size, higher Co content, with excellent hardness and toughness. Endmill and reamer are recommended. Excellent performance for finishing. Especially suitable for cutting steel ( HRC: 45-55 ) ,AI alloy and Ti alloy. |
GH6A | K15 | 1.0 | 6.0 | 92.5 | 14.95 | 2450 |
Drill, endmill and burr are recommended. Especially suitable for cutting non-ferrous metal and graphite(coating is needed). |
GH20 | K20-K40 | 0.8 | 10.3 | 91.7 | 14.40 | 3500 |
Drill and endmill are recommended. Suitable for cutting general steel(HRC<48),grey cast iron, stainless steel and heat resistant alloy. |
GH10.2 | YL10.2 | 0.6 | 10.2 | 92.3 | 14.30 | 3800 |
Drill and endmill are recommended. Especially suitable for cutting stainless steel, heat resistant alloy, cast iron. |
Diameter | Tol.of Length | Hole Diameter | a |
øD | Tol.of Unground | Tol.of Ground | ød | Tol. |
3 | +0.30~+0.50 | h6 | 330 | 0.50 | ±0.10 | 0.10 |
4 | +0.30~+0.50 | h6 | 330 | 0.80 | ±0.10 | 0.10 |
5 | +0.30~+0.50 | h6 | 330 | 1.00 | ±0.10 | 0.13 |
6 | +0.30~+0.50 | h6 | 330 | 1.00 | ±0.15 | 0.15 |
7 | +0.30~+0.60 | h6 | 330 | 1.00 | ±0.15 | 0.15 |
8 | +0.30~+0.60 | h6 | 330 | 1.00 | ±0.15 | 0.15 |
9 | +0.30~+0.60 | h6 | 330 | 1.40 | ±0.15 | 0.20 |
10 | +0.30~+0.60 | h6 | 330 | 1.40 | ±0.15 | 0.20 |
11 | +0.30~+0.60 | h6 | 330 | 1.40 | ±0.15 | 0.28 |
12 | +0.30~+0.60 | h6 | 330 | 1.75 | ±0.15 | 0.30 |
13 | +0.30~+0.70 | h6 | 330 | 1.75 | ±0.15 | 0.34 |
14 | +0.30~+0.70 | h6 | 330 | 1.75 | ±0.15 | 0.37 |
15 | +0.30~+0.70 | h6 | 330 | 2.00 | ±0.20 | 0.40 |
16 | +0.30~+0.70 | h6 | 330 | 2.00 | ±0.20 | 0.40 |
17 | +0.30~+0.80 | h6 | 330 | 2.00 | ±0.20 | 0.47 |
18 | +0.30~+0.80 | h6 | 330 | 2.00 | ±0.20 | 0.50 |
19 | +0.30~+0.80 | h6 | 330 | 2.00 | ±0.20 | 0.50 |
20 | +0.30~+0.80 | h6 | 330 | 2.50 | ±0.25 | 0.50 |
21 | +0.30~+0.80 | h6 | 330 | 2.50 | ±0.25 | 0.50 |
22 | +0.30~+0.80 | h6 | 330 | 2.50 | ±0.25 | 0.50 |
23 | +0.30~+0.80 | h6 | 330 | 2.50 | ±0.25 | 0.50 |
24 | +0.30~+0.80 | h6 | 330 | 3.00 | ±0.25 | 0.50 |
25 | +0.30~+0.80 | h6 | 330 | 3.00 | ±0.25 | 0.50 |
26 | +0.30~+0.80 | h6 | 330 | 3.00 | ±0.25 | 0.50 |
27 | +0.30~+0.80 | h6 | 330 | 3.00 | ±0.25 | 0.50 |
28 | +0.30~+0.80 | h6 | 330 | 3.00 | ±0.25 | 0.50 |
29 | +0.30~+0.80 | h6 | 330 | 3.00 | ±0.25 | 0.50 |
30 | +0.30~+0.80 | h6 | 330 | 3.00 | ±0.25 | 0.50 |
Unit(mm)
Diameter | Tol.of Length (+0~+5) | Hole Diameter | Bolt Circle | a |
øD | Tol.of Unground | Tol.of Ground | ød | Tol. | TKø | Tol. |
4 | +0.30~+0.50 | h6 | 330 | 0.80 | ±0.10 | 1.80 | +0~-0.15 | 0.10 |
5 | +0.30~+0.50 | h6 | 330 | 1.00 | ±0.10 | 2.00 | +0~-0.15 | 0.13 |
6 | +0.30~+0.50 | h6 | 330 | 1.00 | ±0.15 | 3.00 | +0~-0.20 | 0.15 |
7 | +0.30~+0.60 | h6 | 330 | 1.00 | ±0.15 | 3.50 | +0~-0.20 | 0.15 |
8 | +0.30~+0.60 | h6 | 330 | 1.00 | ±0.15 | 4.00 | +0~-0.30 | 0.15 |
9 | +0.30~+0.60 | h6 | 330 | 1.40 | ±0.15 | 4.00 | +0~-0.30 | 0.20 |
10 | +0.30~+0.60 | h6 | 330 | 1.40 | ±0.15 | 5.00 | +0~-0.30 | 0.20 |
11 | +0.30~+0.60 | h6 | 330 | 1.40 | ±0.15 | 5.00 | +0~-0.30 | 0.28 |
12 | +0.30~+0.60 | h6 | 330 | 1.75 | ±0.15 | 6.00 | +0~-0.30 | 0.30 |
13 | +0.30~+0.70 | h6 | 330 | 1.75 | ±0.15 | 6.00 | +0~-0.30 | 0.34 |
14 | +0.30~+0.70 | h6 | 330 | 1.75 | ±0.15 | 7.00 | +0~-0.30 | 0.37 |
15 | +0.30~+0.70 | h6 | 330 | 2.00 | ±0.20 | 7.00 | +0~-0.30 | 0.40 |
16 | +0.30~+0.70 | h6 | 330 | 2.00 | ±0.20 | 8.00 | +0~-0.30 | 0.40 |
17 | +0.30~+0.80 | h6 | 330 | 2.00 | ±0.20 | 8.00 | +0~-0.30 | 0.47 |
18 | +0.30~+0.80 | h6 | 330 | 2.00 | ±0.20 | 9.00 | +0~-0.30 | 0.50 |
19 | +0.30~+0.80 | h6 | 330 | 2.00 | ±0.20 | 9.00 | +0~-0.30 | 0.50 |
20 | +0.30~+0.80 | h6 | 330 | 2.50 | ±0.25 | 10.00 | +0~-0.40 | 0.50 |
21 | +0.30~+0.80 | h6 | 330 | 2.50 | ±0.25 | 10.00 | +0~-0.40 | 0.50 |
22 | +0.30~+0.80 | h6 | 330 | 2.50 | ±0.25 | 11.00 | +0~-0.40 | 0.50 |
23 | +0.30~+0.80 | h6 | 330 | 2.50 | ±0.25 | 11.00 | +0~-0.40 | 0.50 |
24 | +0.30~+0.80 | h6 | 330 | 3.00 | ±0.25 | 12.00 | +0~-0.50 | 0.50 |
25 | +0.30~+0.80 | h6 | 330 | 3.00 | ±0.25 | 12.00 | +0~-0.50 | 0.50 |
26 | +0.30~+0.80 | h6 | 330 | 3.00 | ±0.25 | 13.00 | +0~-0.50 | 0.50 |
Unit(mm) Delivery timeFor samples: 5-7 days
For formal orders:10 -15 daysPaymentT/T, Western Union, PayPal, Money Gram, etc.Payment≤1000 dollars, 100% in advance. Payment≥10000 dollars, 30% T/T in advance ,balance before shipment.PackingStandard cartonShipmentDHL, FedEx, TNT, UPS, EMS, etc.
Any port in China.
Address:
No. 12liyu Industrial Park, Tianyuan District, Zhuzhou City, Hunan Province, Zhuzhou, Hunan, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001, ISO 9000, QC 080000
Company Introduction:
G&H hardmetal import and export Co., Limited locates in Zhuzhou City, Hunan Province, the largest tungsten carbide producing area in China. We have a factory specialized in tungsten carbide and we also do many other products we cannot producing. We are a technology trading company, committed to resource best products for who want to get good quality and best price products.
Our main products includes: Tungsten carbide rod, carbide strips and plates, carbide inserts and shims, Carbide button bits and drill bits, Cemented carbide saw blade and saw tips, Tungsten carbide balls and seats, carbide drawing dies, carbide cold forging dies, carbide brazed tips carbide nozzle, end mills, Machine tools and various type of precision tools according to drawings, non-standard and deep-processing products and so on.
Our company gathered the professional staff members in the area of designing, producing and sales. Our workers are well trained and experienced. Our team is honest, positive, keeping promise, working hard and carefully.
We have good relations with many factories in this line. We can get a discount price to save cost for you.
"Let′s make things better" is always our aim. Give us one opportunity, you will gain more success!